Skip to main content
Adjust Text Size:

You get a lot of options with this beautiful dyed red coral accessory set! The necklace, bracelet and earrings all worn together will give you a classic look, or you can mix and match the pieces with others in your collection to create a look that's unique to you! The necklace and bracelet are individually knotted, and the 18" necklace has a 2" extender so you can fine-tune the length for each outfit. This lovely set would make a great addition to your collection, or a wonderful gift for a loved one!

Set Details

  • Metal: Rhodium plated sterling silver and palladium
  • Stone Information:
  • Necklace and Bracelet: A collection of round full-drilled 4-8mm dyed red coral
  • Earrings: Two round half-drilled 4-8mm dyed red coral
  • Setting Type: Strung and post/adhesive
  • Measurements:
  • Necklace: 18"L + 2" extender x 5/16"W x 5/16"H
  • Bracelet: 8"L x 5/16"W x 5/16"H
  • Earrings: 3/16"L x 3/16"W x 5/16"H
  • Chain Type: Cable link
  • Clasp: Lobster
  • Country of Origin: China

All weights pertaining to gemstones, including diamonds, are minimum weights. Additionally, please note that many gemstones are treated to enhance their beauty. View Gemstone Enhancements and Special Care Requirements for important information.

Bracelets    1625-18inches    Coral    GemsenVogue    PalladiumSilver    Studs    
Bracelet Clasp Types
A clasp is more than a practical device used to fasten your jewelry. It is part of the overall design and can be a very important focal point. Be sure to consider if it will suit your needs of durability, fashion, comfort and peace of mind.

Barrel Clasp: Used on most rope chains to make the chain more secure. The barrel clasp looks like part of the chain and twists to get a pendant on and off.

Lobster Claw Clasp: As a traditional clasp style found in bracelets and necklaces, the lobster claw is generally reserved for heavier styles that may need added strength. The closure's shape is more oblong, similar to a teardrop shape, and is controlled by a tip that opens and closes the spring in the clasp.

Magnetic Clasp:A magnetic clasp relies on a strong internal magnet that works to pull both ends of the clasp together. In most cases, a magnetic clasp is used for light to medium weight jewelry pieces that do not put excessive stress on the magnet.

Slide Insert Clasp: This type of clasp is exactly as it sounds. With a box-like shape that is hollow on the inside, the wearer will slide the nearly-flat tab into the box until it clicks, indicating a secure closure. On some jewelry, a slide insert clasp will be accompanied by a side safety catch, which adds strength and security to the clasp.

Spring Ring Clasp: One of the most common closure types, the spring ring clasp is typically used for light to medium weight bracelets or necklaces. It is round in its design and features a small tip which controls the opening and closing of the spring. The circle then closes around another smaller loop or link at the other end of the strand.

Toggle Clasp: A toggle clasp is a narrow piece of metal, usually designed in the shape of a bar, which is then pushed through a circular ring to act as a fastener. Unlike the lobster claw or spring ring clasps, a toggle clasp is not controlled by a spring. The pretty design is less secure than other closure types, but is usually meant to be a big part of the design and is meant to "show". The clasp is an attractive way to secure a chunkier link bracelet or necklace.

Bracelet Sizing
To measure for a bracelet, wrap a soft, flexible tape measure around your wrist bone. Then, add 3/4" to 1" to that measurement to determine your bracelet size. Generally, 7" is considered a standard women's size and 8" is considered a standard men's size.

Another way to get an ideal fit is to measure the length of a bracelet you own. For bracelets that are to be slipped over the hand, measure the widest part of your hand to ensure the bracelet will fit over it.

Keep in mind that different bracelet styles tend to fit differently depending upon the clasp and materials used. Bracelets with adjustable clasps are usually one size fits all. Those with large beads or stones have less room for your wrist. Also, bracelets with links can usually be shortened by removing one or more links.

Necklace Clasp Types
A clasp is more than a practical device used to fasten your jewelry. It is part of the overall design and can be a very important focal point. Be sure to consider if it will suit your needs of durability, fashion, comfort and peace of mind.

Barrel Clasp: Used on most rope chains to make the chain more secure. The barrel clasp looks like part of the chain and twists to get a pendant on and off.

Lobster Claw Clasp: As a traditional clasp style found in bracelets and necklaces, the lobster claw is generally reserved for heavier styles that may need added strength. The closure's shape is more oblong, similar to a teardrop shape, and is controlled by a tip that opens and closes the spring in the clasp.

Magnetic Clasp: A magnetic clasp relies on a strong internal magnet that works to pull both ends of the clasp together. In most cases, a magnetic clasp is used for light to medium weight jewelry pieces that do not put excessive stress on the magnet.

S-Clasp: An S-shaped piece of metal that connects a chain by hooking metal rings on each end of the S-shape.

Slide Insert Clasp: This type of clasp is exactly as it sounds. With a box-like shape that is hollow on the inside, the wearer will slide the nearly-flat tab into the box until it clicks, indicating a secure closure. On some jewelry, a slide insert clasp will be accompanied by a side safety catch, which adds strength and security to the clasp.

Spring Ring Clasp: One of the most common closure types, the spring ring clasp is typically used for light to medium weight bracelets or necklaces. It is round in its design and features a small tip which controls the opening and closing of the spring. The circle then closes around another smaller loop or link at the other end of the strand.

Toggle Clasp: A toggle clasp is a narrow piece of metal, usually designed in the shape of a bar, which is then pushed through a circular ring to act as a fastener. Unlike the lobster claw or spring ring clasps, a toggle clasp is not controlled by a spring. The pretty design is less secure than other closure types, but is usually meant to be a big part of the design and is meant to "show". The clasp is an attractive way to secure a chunkier link bracelet or necklace.

Necklace Sizing
The length of a necklace or chain you buy depends upon a number of factors, including what you will be wearing with it and your neck size.

To measure your neck, wrap a soft, flexible tape measure around the base of your neck. This is the same measurement used for collar sizes in men's shirts. A good rule of thumb is to buy a necklace or chain a minimum of two sizes up from your neck measurement.

Coral
Most people think the coral used in jewelry comes from South Pacific coral reefs such as the Great Barrier Reef off Australia. However, these coral reefs are formed by a different species than the coral that is traditionally used in jewelry. Most jewelry coral is found in the Mediterranean Sea or in the Pacific near Japan and Taiwan. It grows in ocean colonies of branches that look like underwater trees, and is found in a range of colors, including pale pink (called angelskin coral), orange, red (called noble coral), white and black. The most valued colors are deep red, black and pink. It is much softer than other gems, with a hardness of only 3.5 on the Mohs Scale. In jewelry-making, coral is often carved into beads or cameos, or can be left and polished in its natural branch-like form.

Among the most ancient of gem materials, coral has been used for adornment since prehistoric times. While coral inlays and ornaments have been found in Celtic tombs from the Iron Age, the gem also has a history of religious significance. It is one of the seven treasures in Buddhist scriptures, and coral rosaries are used by Tibetan Lamas.

Coral was long thought to be a powerful talisman that could protect from evil spirits and ward off hurricanes. Because it was believed that coral protected the wearer, it was a traditional gift to children. Coral was also believed to lose its powers once broken. Today, coral is the traditional 35th anniversary gift for married couples.

Palladium:
A selection of our jewelry is made of sterling palladium alloy. Palladium is a member of the platinum group of precious metals. By replacing a portion of the copper content used in standard sterling silver with palladium, this proprietary formula renders a precious metal with superior performance attributes. Sterling palladium is five times more tarnish-resistant than standard sterling silver and has strength similar to that of 14K gold.

Palladium has been used as a precious metal in jewelry since 1939, originally as an alternative to platinum for making white gold. Its naturally white color requires no rhodium plating. Additionally, palladium is proportionally much lighter than platinum and is ideal for use in heavier gemstone jewelry. It is a more expensive alloy than nickel, but it seldom causes the allergic reactions that nickel alloy can.

To care for your plated jewelry items:

  • Remove jewelry before bathing, swimming, washing hands, putting on make-up, lotions, perfumes, and/or working with household chemicals, cleaners, or acidic liquids.
  • Do not clean plated jewelry in an ultrasonic cleaner or in silver cleaning solutions, as it could completely remove the plating finish from your item.
  • Ensure your jewelry item is thoroughly dry before storing. Moisture in an enclosed space can increase tarnishing.
  • Store your plated jewelry in a jewelry box lined with felt or anti-tarnish material. Items should not be stacked as this may cause damage to the plating surface.
  • Do not use excessive pressure when cleaning with a polishing cloth or soft brush, as this may cause damage to the plating.
  • Over time your plated items will need to be re-plated. Contact your local jeweler for information on plating services.

    Earring Back Types


    The backing is an important part of an earring, providing a secure closure and comfortable fit. Keep in mind, some earring styles work better with certain back types. Experiment with the different types to find the best fit for you!

    Butterfly Back: A double looped piece resembling a butterfly that fits over a post. Variations on this design are called push back clasps. The basic post and butterfly back are usually used for stud earrings and lighter weight drop earrings.

    Hinged Snap Backs: This clasp features a hinged post that snaps into a groove on the back of the earring. It is commonly found on hoops. Sometimes the hinged post is curved to provide more room to fit around the ear, sometimes called a saddleback.

    Hook Backs: This earring backing is simply a long, bent post that fits through the piercing. Hooks have several variations, most notably the shepherd's hook and the French hook. While thin wire hooks reduce the weight of long earrings, making them more comfortable, they aren't as secure as other clasp styles.

    Lever Back: A hinged lever snaps shut against the curved post to form a closed loop around the ear lobe. This clasp is very secure and good for large or medium sized styles that drop just below the ear.

    Omega: Also called French clips, this clasp has a straight post and a looped lever. The hinged lever closes around the post and is held against the ear with pressure. The omega clasp is the most secure clasp, especially for the larger, heavier earrings.

    Screw back: This backing is a slight variation of the standard post and butterfly nut back. Instead of pushing on the back, the nut twists onto the threaded post. A screw back post design is often preferred for expensive diamond stud earrings that require increased security.